Living in Hell – 160,000 Miles of Service Revealed
A photo documented autopsy by Jake Raby
The story and associated information you are about to read began September 3, 2002, when I first installed this engine into my 912E. The next 8 years of the engine’s life would be filled with neglect, abuse and the chores associated with being a four-season daily driver in the mountains of North Georgia over a span of 160,000 trouble-free miles.
I will begin by posting facts related to the life of this engine, when it was serviced, how it was treated and maintained. I will then share my original intent with this engine, how it was designed, how it was assembled and the parts that I used to create it. This story will illustrate the robust design of the Type 4 engine and what can be expected when Aircooled Technology takes the engine to the next level of performance, reliability, and longevity. I have kept extensive records relating to this engine for the very purposes of this autopsy that unfolds below.
As I complete the engine revitalization follow the link at the bottom of this article to see the actions that I take to prepare this engine, transaxle and entire Porsche for another decade of trouble-free service as my daily driver.
This is my personal engine, these are my accounts.
Facts for RAT Engine 20020139 – Installed into 912600985
- Assembled late August 2002
- Engine was based from the original 100K mile donor from 912600985
- 2056cc “912E Special” combination
- Average fuel economy of 32 MPG. Peak MPG 41 MPG in 2003
- Oil consumption average 1.8qt in 5K miles
- RAT Engine Dyno power (new) :129HP, 123lb/ft torque (see graphs at bottom)
- Engine used synthetic lubricant ONLY after 500 mile break in
- Engine saw two valve adjustments since new, the last recorded February 3 2003
- Engine went 23,000 miles on a single oil service
- Engine only saw 14 oil services in 160,000 miles (sometimes the filter wasn’t changed for 3 services in a row!)
- This engine was pulled for autopsy only, it did NOT fail!
- All work was done as an educational exploration and to prepare the 912E for 10 more years of service as my daily driver. (it was pulled to service the 260K mile transaxle!)
- This engine had ZERO occurrences where it wasn’t 100% reliable
- No repairs were made to the engine during its time in service
- Engine used carburetors for the first 59,000 miles
- Was converted to programmble EFI in 2004 and was used to test three different ECUs for the RAT engine program
- Engine was built with daily driver performance in mind
- Engine/ car saw 5 PCA DE events at Road Atlanta and Roebling Road in 2003-2004 (over 1200 track miles)
- The final dyno chart for the engine plots 102RWHP on our dyno jet chassis dyno(see graph at bottom of page). This means the engine was making the same power as new with 160,000 hard miles on the odometer and little service performed!
- Engine comprised 100% of RAT and OE components
- All internal components were cryogenically enhanced with the RAT profile
- Engine was not removed for all 8 years of service, not even for clutch service
- After 8 years and 160,000 miles of service the engine still produced 9HP more than the original 2.0 912E factory engine rating of 76HP!
- Until the day the vehicle came off the road for the 2010 revitalization the engine was running perfect, barely leaked oil and had no notable oil consumption.
When I traded for my 912E it was a near perfect example of a 100,000 mile, well maintained and very clean 912E. The car was all stock, but the engine had overheated and melted a cylinder head, ultimately creating a situation much like a cutting torch that melted the engine tin and the stock EFI wire harness. Since the EFI harness was melted I decided to rip off the stock EFI and replace the system with a pair of carbs.
I was looking for a good driver car, something with good heat for the winter and great reliability and longevity. I don’t have time to wrench on my own cars, which is one reason this engine has been so neglected… Plus it offered the opportunity to put what I create to the ultimate test.. If an engine can live through service this harsh in my car, my customer would never break it. So it began.. I took a few used parts from test engines, coupled those to some of my new parts and applied them to the 100K mile core that came from the car originally. I did not use exotic components, I just assembled the engine in standard form paying attention to internal clearances and applying my enhancements.I assembled the engine completely and had it on the dyno in one weekend. The combination that I designed is very similar to the of my current 2056cc Porsche offering making similar performance and offering the same reliability and longevity coupled to awesome drive-ability. The only out of the ordinary process for the era the engine was built was the cryogenic enhancement of the components, something that I believe strongly in and even more so after the autopsy of this engine.
We routinely get the questions “How long do your engines last?” and “Are your engines reliable?”… Well I think that the below pictures and captions will forever answer these questions better than anything else. The internals of this engine were in excellent condition, the bearings had near zero wear, valve guides were barely worn, cylinders only had 5% leakdown cold, etc, etc.. The crankshaft doesn’t even need polishing, it also wasn’t polished at the 100K mile original rebuild, 160K miles ago! This crank has 260,000 miles of service and is still STD/STD never machined!
Keep in mind this isn’t a stock engine.. It produced 50HP more than stock after 160K miles of service. It wasn’t pulled because it had to be for internal attention, but more because 3rd gear in the 923 gearbox was trashed and I wanted to take the opportunity to clean and inspect the engine and revitalize it with a new engine combination.
The Type 4 engine platform is robust, reliable and as pictured below incredibly resistant to neglect, abuse and lack of scheduled maintenance… Because I have treated my car like this, please don’t do the same to yours. To me engines are disposable and expendable. Thats my job and its my life.
See captions below, study the pictures in detail. You’ll see why you need a MassIVe Type 4 engine created by Aircooled Technology.
Here are some good examples of our engine installations, all are Type 4 based and utilize our proprietary DTM cooling system.
Here is the power the engine made before teardown, with 160,000 miles on the odometer. The first graph was with the 35,000 mile dirty air filter, the second was after the air filter was changed. The oil that was in the engine for this last dyno test had been there since 2007!!! Note that the engine still made 102 RWHP and when the 20% reduction is considered from the flywheel to the rear wheels that means the engine was just as strong after 160K as it was when new! It actually appears the engine is making MORE torque after 160K than it did new!